Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Need some help!!

Thread Tools
 
Search this Thread
 
  #1  
Old 11-20-2007, 08:36 PM
ncsuguy730's Avatar
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 4
Exclamation Need some help!!

Hey guys, I'm new to the forum but have ventured on here reading many of the forums before. I've never really worked on my car much but I do know a little about it. I have a 01 GT with about 83000 miles on it. I bought it with 5000 so I had it most of its life and have had regular maintenance and all that done. Anyways, I got in my car this evening to run to the store and it all most died when I cranked it(dropping to like 200rpm and then recovering) well it then preceded to idle at like 400rpm and have some what of an inconsistent idle varying 100-200rpms over and under 400rpm. Not thinking to much about it I headed to the store and my service engine soon light came on. The store is close so it wasn't much of a drive there. After shutting it off and cranking it again to head back to the house it was still doing the same thing. A few weeks ago it started this thing where after I had been driving for a while it would idle at like 1000rpm and not stop until I would shut it off crank it back up and it would be fine. Please help!! I am supposed to leave to go home for thanksgiving tomorrow and I'm not sure if this is something that needs to be taken care of before the trip(about an hour and a half) THANKS!!!
 
  #2  
Old 11-20-2007, 08:43 PM
3.8for the win's Avatar
Evolution 9
Join Date: Sep 2007
Posts: 3,887
Default

you might have to chage you air filter, or you might have to clean you MAF or IAC.
 
  #3  
Old 11-20-2007, 08:46 PM
ncsuguy730's Avatar
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 4
Default

ok thanks, i removed the air silencer and installed a k&n filter about 4 months ago...just a note!
 
  #4  
Old 11-21-2007, 10:06 AM
ncsuguy730's Avatar
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 4
Default

Ok had a buddy pull the code at his shop. P1507= Idle air control underspeed error. what in the world does that mean?
 
  #5  
Old 11-21-2007, 11:11 AM
ericgutz's Avatar
Member
Join Date: Jan 2006
Location: Virginia Beach, VA
Posts: 70
Default

Probably need to clean out or replace your IAC.
 
  #6  
Old 11-21-2007, 11:11 AM
stanger00's Avatar
Senior Member
Join Date: Nov 2004
Location: Pinole, Ca
Posts: 3,842
Default

go to a ford dealership and purchase a new IAC. the IAC is the little solenoid looking thing connected to the plenum. those go bad and that was the first thing that came to mind when i read your problem. since yours tripped the CEL than you might as well change it.
 
  #7  
Old 11-21-2007, 11:29 AM
ncsuguy730's Avatar
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 4
Default

thanks alot guys!!! ill get a new IAC put in!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OneWicked46
Modular 4.6L Tech
6
08-01-2005 05:18 AM
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM
kcmustang
5.0L Tech
9
04-22-2005 09:20 PM
kcmustang
New Members!
1
04-18-2005 09:00 AM
USAFTexan80
V6 Tech Forums
6
12-24-2004 07:50 AM



Quick Reply: Need some help!!



All times are GMT -7. The time now is 11:38 PM.