stroked / bored?

sidekicksurfer · 08-04-2007, 05:52 PM

Just curious if anyone knows how much horsepower you gain from a stroker kit for an 03 4.6 2v? or if anyone has had that engine just bored about .20 over and what where the results?? Thanks guys
--Jay--

v6'stang · 08-05-2007, 10:16 AM

hey try posting under 4.6 tech. the section you are posting in is for suggestions on how to make the forum better. you're not going to get any responses here.

r3dn3ck · 08-05-2007, 02:59 PM

moved.

unless you change the stock cams for something lumpier you'll get minimal gains on the 4.6 block. If you're going to add cubes then have your heads ported and look for a nice hot street cam like vt stage 2 or crower stage 2. An aftermarket intake may be needed to refine your power band.

If you just poke it or stroke it and don't do anything else expect tq gains but don't expect more than marginal hp gains if any.

v6'stang · 08-05-2007, 04:01 PM

poke it or stroke it...perv. lol thx for movin' it red.

Cheddar · 08-09-2007, 05:09 PM

For a lower compression stroker kit where would you look to find something like that just curious in this topic aswell

r3dn3ck · 08-10-2007, 08:09 AM

you just get a bigger dish in the pistons.

08-04-2007, 05:52 PM	#1 (permalink)
sidekicksurfer Member Join Date: Aug 2007 Posts: 47	stroked / bored? Just curious if anyone knows how much horsepower you gain from a stroker kit for an 03 4.6 2v? or if anyone has had that engine just bored about .20 over and what where the results?? Thanks guys --Jay--

08-05-2007, 10:16 AM	#2 (permalink)
v6'stang Senior Member Join Date: Mar 2005 Location: FL Posts: 927	hey try posting under 4.6 tech. the section you are posting in is for suggestions on how to make the forum better. you're not going to get any responses here. __________________ Mods: 17x9 black cobra wheels, BBK CAI, tru dual flowmasters, sct 4bank elim. chip, motive 3.73's, frpp t-lok. ...and the list grows.

08-05-2007, 04:01 PM	#4 (permalink)
v6'stang Senior Member Join Date: Mar 2005 Location: FL Posts: 927	poke it or stroke it...perv. lol thx for movin' it red. __________________ Mods: 17x9 black cobra wheels, BBK CAI, tru dual flowmasters, sct 4bank elim. chip, motive 3.73's, frpp t-lok. ...and the list grows.

08-09-2007, 05:09 PM	#5 (permalink)
Cheddar Junior Member Join Date: Jun 2007 Location: Edmonton Posts: 16	For a lower compression stroker kit where would you look to find something like that just curious in this topic aswell __________________ Candy Apple 1996 GT Current -BBK CAI -March Perf Pullies -B&M short throw -Superchip hand held tuner Current visual -Cobra Black out Headlight/Corners/Tails -Sequential Tails -Mach 1 Chin -Saleen S281 Spoiler Summer Mods 5.4 3V swap with cobra 6spd supporting mods Shooting for 400RWHP on an N/A 5.4 More to come

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-05-2007, 02:59 PM	#3 (permalink)
r3dn3ck Wowbagger hates me too! Join Date: Nov 2005 Location: Magrathea/California Posts: 6,693	moved. unless you change the stock cams for something lumpier you'll get minimal gains on the 4.6 block. If you're going to add cubes then have your heads ported and look for a nice hot street cam like vt stage 2 or crower stage 2. An aftermarket intake may be needed to refine your power band. If you just poke it or stroke it and don't do anything else expect tq gains but don't expect more than marginal hp gains if any.

08-10-2007, 08:09 AM	#6 (permalink)
r3dn3ck Wowbagger hates me too! Join Date: Nov 2005 Location: Magrathea/California Posts: 6,693	you just get a bigger dish in the pistons.